Operating instructions ResistTel IP4/IP162
03/22
43
Factory settings:
display phone no.:
.....
On
// Number transmission to the called party is switched on
5.1.5
Main menu – Phone settings
5.1.5.1
Headset: Off | On
Main menu\Phone settings\
Headset
Headset selection parameter determines whether the headset conversation modes are enabled and
whether they are activated or deactivated when the corresponding key is pressed. The release of the
headset is indicated by the pictogram on the right in the footer of the display when the telephone is
idle.
To change the setting, set the selection parameter described below to the value you want and, if you
have changed the setting, press the menu key repeatedly until the text display
OK
confirms that the
change has been saved.
Headset:
.................... Selection parameter for switching headset release on and off
Off
Headset operating modes are locked
On
Headset operating modes are released
Default setting:
Headset:
..........................
Off
// Headset operating modes are locked
5.1.5.2
Direct dial
Main menu\Phone settings\
Direct dial
In the Direct Dial dialog, a destination number can be specified that the phone calls after an adjustable
delay if the user switches from idle mode to one of the conversation modes, e.g. handset mode. Within
the current delay time, the user has the option of averting the pending direct dialing by manually dialing
another destination number.
To change the direct dial settings, first press the key to open the dialog of the same name. Set the
configuration you want for the dialog elements described below and, if you have changed settings, press
the menu key repeatedly until the
OK
text display confirms that the changes have been saved.
Direct dial:
.............. Selection parameter for switching direct dialing on and off
Off
Direct dialing is turned off
On
Direct dialing is switched on
Number:
...................... Input parameters for specifying the destination phone number and optional
Dtmf characters that are transmitted to the destination phone after the connec-
tion has been established. The optional Dtmf characters are to be added to the
destination phone number, separated by a comma.
4711
Destination number
4711,*101# Destination number with trailing Dtmf character transmission
Delay (seconds):
....... Input parameter to specify the delay duration T in seconds.
0 s ≤ T ≤ 65535 s
Hints:
If
direct dia
l is activated without delay, pressing a key causes the text message "
Keyboard
locked!
" to be displayed. An exception to this is the menu key , which you can use to change
the direct dialling parameters.
Default setting:
Direct dial:
................... Off // direct dialing disabled
Number:
// empty
Delay (seconds): 0
// delay 0 s
