manualshive.com logo in svg

Eaton INDGW-M2, User Manual

Share
Download
Eaton INDGW-M2 User Manual Download Page 215

Front panel connectors and LED indicators

Information  –  215

•
•
•

•
•

•

•

•

7  Information

7.1  Front panel connectors and LED indicators

Nbr

Name

Description

Network connector

Ethernet port

Network speed LED

Flashing green sequences:

1 flash — Port operating at 10Mbps
2 flashes — Port operating at 100Mbps
3 flashes — Port operating at 1Gbps

Network link/activity LED

Off — UPS Network Module is not connected to the network.
Solid yellow — UPS Network Module is connected to the network, but no activity 
detected.
Flashing yellow — UPS Network Module is connected to the network and sending 
or receiving data.

AUX connector

For Network Module accessories only.

Restart button

Ball point pen or equivalent will be needed to restart:

Short press (<6s) — Safe software restart (firmware safely shutdown before 
restart).

Long press (>9s) — Forced hardware restart.

ON LED

Flashing green — Network Module is operating normally.

Warning LED

Solid red — Network Module is in error state.

Do not use for general power supply or USB charger.

Summary of Contents for INDGW-M2





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands