11
GREEN MOTION HOME USER MANUAL
MN191026EN September 2022 www.eaton.com
6. How to start and stop charging
How to start a charging session:
•
Check that the EV charger is ready for use. Please refer to Section 5.
•
Connect the cable of the EV charger to the appropriate socket of the car or use the cable of the EV owner to connect
to the socket of the EV charger. To remove the connector from its holder, pull it first vertically and then horizontally. See
Figure 4.
•
While the vehicle is charging, the LED indicator progresses blue.
•
When the battery is fully charged, the LED indicator is solid blue.
•
Please refer to the Section 5 for more information.
How to stop a charging session:
•
Unplug the connector from the vehicle and/or the EV charger. Usually, the connector must first be released from inside
the vehicle (please refer to the instruction manual of your vehicle for more information).
Figure 4. Removing the plug from the EV charger
Electrical systems or devices must be checked by the installer of the system before commissioning and
switching on the unit for the first time.
1
2
1
2
Tag
Description
1
Green Motion Home EV charger
2
Type 2 connector
