Eaton Fuller FSO-2405, Service Manual

Page: 93 / 163

93
Rear Section Disassembly
3
FSO-2405
2nd Ed. 02/07
Rear Section
11. Lock the mainshaft again with the special tool
and shift transmission into the 1st gear.
NOTE: See “Special Tools”, Ref. E014010.
NOTE: As an option, the tool # E006003 may
be used for locking the mainshaft. See
"Special Tools, Using the Eaton tool #
E006003".
12. Remove the countershaft rear nut (or snap ring).
NOTE: On 2006, the nut was replaced by a
snap ring in some applications.
NOTA: See “Special Tools”, Ref. E006002.
13. Remove the countershaft ball bearing.
14. Remove the bearing thrust washer.
NOTE: On countershaft with threadless end,
which uses a snap ring instead of the nut,
the thrust washer has a retaining ball (see
detail), which should also be removed.
15. Remove the reverse gear and the ball bearing
together from the mainshaft by pulling them off.
NOTE: See “Special Tools” - Ref. E012001,
E012002.
13 14
FSO-2405/5
11
12
FSO-2405/138
FSO-2405/153
15