The RESTORE option brings up a menu to load the new software,
to load your current saved program, or to load your favorites list.
To restore your favorites after a software update:
• First backup all files.
• Then backup the favorites list.
• Next, restore all factory crimper files.
Then restore the favorites list.
Select Exit to close the utility and use the crimper.
To install new updates without restoring favorites:
• First backup all files.
• Next, restore all factory crimper files.
Select Exit to close the utility and use the crimper.
If there is a problem with the new program use the USB utility to restore
all your files to their previous state.
*Note – offsets will need to be re-entered and verified.
PLC Updates
In the event that a PLC update is required, a micro-SD memory
card (SD or SDHC) with a capacity of 128 MB to 32 GB is required.
To perform update:
1. With the machine turned off, open the
electrical box and locate the PLC.
2. Open the drawer on the left side of the PLC and
insert the micro-SD card.
3. Close the SD card drawer.
4. Turn on the machine. Updates will
install automatically.
5. After updates complete, turn off the machine.
6. Remove the micro-SD card from the PLC
and close the electrical box.
7. Proceed with HMI update using the provided
USB drive as described above.
Updating software (cont.)
GO BACK TO MAIN MENU
EATON FT1380E USB UTILITY - RESTORE MENU
RESTORE ALL YOUR FILES
FACTORY RESET - RESTORE ALL ORIGINAL EATON FT1380E FILES
RESTORE YOUR FAVORITES LIST
