8
DSLB 20 LED Beacon Technical Manual
DSLB 20 LED BEACON TECHNICAL MANUAL
TMF0053.A
www.eaton.com
Cable gland
Type
HIBM-X2S INMETRO
Size
M20x1,5 mm / ISO 965-1, ISO 965-3
1
=
2
= 24 mm
H = 30 mm L = 10 mm
Cable diameter
Ø 7 mm … 12 mm
Torques
5,0 Nm ± 0,5 /
1
2,0 Nm ± 0,5 /
2
Temperature range
-60 °C ≤ Ta ≤ +70 °C
Degree of protection
IP66, IP68 / ABNT NBR IEC 60529
Marking
Ex eb IIC Gb
Ex tb IIIC Db
Certificate
DNV 18.0150 X
Cable glands are suitable for fixed installations only. The cables must be effectively fixed to prevent pulling or twisting.
Specified torques must be observed. When tightening the cover
1
, the side of the cable entry assembly closest to the
housing
2
must be protected against rotation.
The disc mounted to prevent dust ingress should be removed during installation.
All unused cable glands must be sealed with suitable insert plugs. When a previously installed insert tap is removed to
install the proper cable, the sealing rings must be replaced with new ones (original replacement parts only).
For installing in dusty environments: WARNING—POTENTIAL RISK OF ELECTROSTATIC CHARGE. Clean while wearing
antistatic clothing only.
Subject to changes or errors