8 What you need to know about SmartWire-DT
8.8 SWD assist
98
SmartWire-DT Gateway EU5C-SWD-EIP-MODTCP
08/17 MN120003Z EN
www.eaton.com
LEDs on the module
Table 29:
LEDs on the relevant module
Further information is provided in the manual "SmartWire-DT The System",
MN05006002Z.
8.8 SWD assist
The SWD assist planning, ordering and commissioning program can be used
to perform the following functions, among others:
•
Selecting modules, as well as a gateway
•
Entering device parameters for the SWD gateway and the
SWD modules
•
Entering SWD network parameters
•
Creating I/O allocation lists
•
Transferring a planned SWD configuration to a gateway or, vice versa,
from a gateway to the current SWD assist project
•
Status indication of the inputs/outputs
•
Wiring test
•
Reading of the stored actual configuration
•
Importing the planned SWD configuration stored on the gateway
•
Comparison of the target and actual configuration
•
Display of cyclical and acyclical diagnostics messages
The Online Help function provides a detailed description of how to use SWD-
Assist. In order to open it, click on the "?" icon on the SWD-Assist menu bar
or press the F1 key.
LED
Status
Module-LED
off
no 15 V supply voltage
green flashing
Waiting for addressing
green fast flashing
Error on module and diagnostic alarm is "1"
Green continuous light
Module matches the target configuration.
￫
A planned SWD configuration with the EU5C-SWD-EIP-
MODTCP gateway can be created with SWD assist version 1.40
or higher.
