![background image](http://html.mh-extra.com/html/eaton/epdu-g3/epdu-g3_operation-manual_524480119.webp)
Web Interface Operation
Eaton ePDU G3 Operation Manual P-164000277—Rev 1
www.eaton.com/ePDU
111
10. Set the time of delivery using the drop-down list.
11. Click
Test
to send a test e-mail.
12. Otherwise, click
Save
or
Cancel
.
Configure the LCD Password
NOTE 1
Only an administrator can activate, deactivate, or modify the LCD password.
NOTE 2
There can only be one LCD password on the ePDU.
1.
Access the Web interface and log in.
2.
Under Settings, select Access Accounts. The Access Accounts page displays.
3.
In the LCD Access panel, perform the following:
l
Activate the feature to change the password.
l
Type the LCD password.
l
Type the LCD password again.
4.Click
Save
.
Configure Local User Access
NOTE 1
Only an administrator can create or modify a user account.
NOTE 2
Local users can use this user name and password for authentication if the
authentication mode selected in the Network Security Global submenu is Local (see
“Set Authentication Mode” on page 122).
NOTE 3
The User name is used for authentication. It must be unique. If there is a name
conflict when you are creating a new account, a warning message displays.
1.
Access the Web interface and log in.
2.
Under Settings, select Access Accounts. The Access Accounts page displays.
3.
In the Multi-User Access panel, select
Add a local user
from the Add drop down list. The Users Settings
dialog displays.
4.
Perform the following:
l
Type the user’s login user name to replace the default name.
l
Type the user’s password (minimum of five characters).
l
Type the user’s password again.
5.
Choose one of the following profile characteristics:
l
Admin
: This user has administrator privileges and controls the access of other users to the Web
interface. The Administrator can restart the communications module, but cannot perform a firmware
upgrade.
l
ePDU User:
This user has access to the ePDU and either read only or restricted read-write privileges.
l
Outlet User:
This user has access to the specified outlet or outlets. Select the outlet or outlets and the
user-defined groups this user can access.