![background image](http://html.mh-extra.com/html/eaton/epdu-g3/epdu-g3_operation-manual_524480130.webp)
Web Interface Operation
Eaton ePDU G3 Operation Manual P-164000277—Rev 1
www.eaton.com/ePDU
122
Enable/Disable the Telnet Interface
NOTE
Selecting a console type on the Security page makes the corresponding port entry
box active.
Not selecting a console type makes the corresponding port entry box inactive and
grayed-out.
1.
Access the Web interface and log in.
2.
Under Network and Security, select Global. The Security page displays.
3.
In the Ports Settings panel, select
Telnet
from the Console drop-down list to enable the Telnet interface,
or select
Disabled
to disable it.
4.
If enabled, the Telnet Port entry box is active. Type the port number.
5.
Click
Save
.
6.
Open the System submenu in the Settings menu. In the Network Management Card panel, click
Restart
network management card
to restart the ePDU Network Management and Control (eNMC) module.
Enable/Disable the SSH Interface
1.
Access the Web interface and log in.
2.
Under Network and Security, select Global. The Security page displays.
3.
In the Ports Settings panel, select
SSH
from the Console drop-down list to enable the SSH interface, or
select
Disabled
to disable it.
4.
If enabled, the SSH Port entry box is active. Type the port number.
5.
Click
Save
.
6.
Open the System submenu in the Settings menu. In the Network Management Card panel, click
Restart
network management card
to restart the ePDU Network Management and Control (eNMC) module.
Enable/Disable FTP
1.
Access the Web interface and log in.
2.
Under Network and Security, select Global. The Security page displays.
3.
In the Ports Settings panel, check the
FTP Enable
check box to enable FTP, or uncheck the box to disable
it.
4.
Click
Save
.
5.
Open the System submenu in the Settings menu. In the Network Management Card panel, click
Restart
network management card
to restart the ePDU Network Management and Control (eNMC) module.
Set Authentication Mode
1.
Access the Web interface and log in.
2.
Under Network and Security, select Global. The Security page displays.