![background image](http://html.mh-extra.com/html/eaton/epdu-g3/epdu-g3_operating-manual_524483053.webp)
Network Communication Configuration
Eaton ePDU G3 Operation Manual P-164000277—Rev 5
44
LCD— Static IP address
1.
Disable DHCP (see Figure 39).
Figure 39. Disable DHCP
2.
Set the static IP address (see Figure 40). Wait 10 seconds.
Figure 40. Set the Static IP Address
3.
After 10 seconds, use the reset button to restart the eNMC module and apply the new settings (see
Figure 41).
Figure 41. Reset Button
Enter
ESC
Enter
ESC
Enter
ESC
DHCP
Disable
Enable
Disable
Enter
ESC
Main Menu
Active Alarms
Alarms History
Meter
Control
Settings
IPv4 Settings
IP Address
Subnet Mask
Gateway
DHCP
Settings
Display
Daisy Chain
Language
IPv4
Clear History
Enter
Enter
ESC
ESC
Enter
ESC
IPv4 Settings
DHCP
Subnet Mask
Gateway
IP address
Enter
ESC
Main Menu
Active Alarms
Alarms History
Meter
Control
Settings
IP address
192
168
123
123
OK
Settings
Display
Daisy Chain
Language
IPv4
Clear History
Reset Button