Eaton EMS-SWD Series, Manual

Page: 80 / 84

4 Appendix
4.1 Technical Data
76
Electronic motor starter EMS-...-SWD 12/18 MN034002ZU-DE/EN www.eaton.com
Ambient climatic conditions
Operating ambient temperature °C -5 - +60 -5 - +60
Condensation not permissible -
prevent with suitable measures not permissible -
prevent with suitable measures
Storage °C -40 - +80 -40 - +80
SmartWire-DT interface
Module type SmartWire-DT module (slave) SmartWire-DT module (slave)
Baud rate setting automatic automatic
Status display SmartWire-DT LED green/orange green/orange
Connection Plug, 8-pole,
Connector:
Blade terminal SWD4-8MF2 Plug, 8-pole,
Connector:
Blade terminal SWD4-8MF2
Supply voltage U
AUX
Rated operating voltage V DC 24 (-15 % + 20 %) 24 (-15 % + 20 %)
Residual ripple of input voltage % ≦ 5 ≦ 5
Protection against polarity reversal yes yes
Current consumption
(if the +, EN+ / -, EN- inputs are linked) mA 70 70
Supply voltage U
SWD
Rated operating voltage V DC 15 (-30 % + 10 %) 15 (-30 % + 10 %)
Current consumption mA 50 50
Potential isolation from U
AUX
yes yes
Main circuit data
Operating voltage V AC 42 - 500 42 - 500
Switching principle Safety output stage with bypass,
3-phase switch off Safety output stage with bypass,
3-phase switch off
Nominal rated frequency Hz 45 - 65 45 - 65
Rated operational current I
e
(EN 60947-4-2)
AC51: EN 60947-4-3 A 0.18 - 2.4 1.5 - 9
AC53a: EN 60947-4-2 A 0.18 - 2.4 1.5 - 7
Break time for safe stop
normally ms 30 30
maximum ms 200 200
Break time in the event of a supply voltage loss
normally ms 50 50
maximum ms 500 500
Unit EMS-…S-2.4-SWD EMS-…S-9-SWD