- 1 -
This instruction sheet provides only information on the electrical
specification, general functions, installation and wiring. It should be read
and understood before attempting to install or use the modules.
Further information can be found in the ELC series Programming
Manual.
These digital I/O modules are part of an OPEN TYPE control system.
The ELCM should be kept in an enclosure away from airborne dust,
humidity, electric shock risk and vibration. Your application may require
that the enclosure be locked to prevent non-maintenance staff from
operating the controller (e.g. key or specific tools that are required for
opening the enclosure) in cases where danger and damage to
equipment or personnel may occur.
Do not connect AC power to any of the DC input / output terminals, as it
will damage the ELCM. Check all wiring prior to power up.
Ensure that the ground terminal
is correctly grounded in order to
prevent electromagnetic interference.
This manual is subject to change without notice.
Product Profile & Dimension
ELCM-EX16NNDR
8D I / 8D O
R
Removable
I/O termi nal
Panel mounti ng hol e
DIN rail mounting
slot (35mm)
POWER i ndicators
I/O point indicators
I/O module
connection port
I/O terminal No.
Output type
Module Name
I/O module cl ip
I/O point indicators
I/O module
connection port
78
61.5
1
0
5
.8
2
9
8
9
0
1
1
0
L1
L
