ELC-CODNETM
10 For more Information visit: www.eaton.com MN05006002E
The following is an example to illustrate the four points above.
Assume there are 2 devices on the DeviceNet network:
ELC-CODNETM Scanner
ELC-CADNET I/O Adapter
Right click the ELC-CADNET module’s icon and choose Parameter Edit and the following
will open:
Click “Read” and the software will begin reading each parameter listed from the device and
populate the entire list of parameters with the data from the device. When the upload is
complete, this parameter page will look like the following:
Summary of Contents for ELC-CODNETM
Page 1: ...ELC CODNETM Effective December 2010 Users Manual...
Page 2: ......
