EGR-5000
Quick Start Guide
EGR-5000 Quick Start Guide
Effective November 2011
11
Use the arrow keys
to move back to the
“System Para” main
menu. Use the up
or down arrow keys
to select the
“General Settings”
parameter then
press the right
arrow key.
Use the up or down
arrow keys to
highlight the “Phase
Sequence”
parameter then
press the soft key
under the wrench
icon.
To edit parameters,
the User must enter
a valid password
(see Section 1:
Password Entry).
Use the up or down
arrow keys to set the
desired Phase
Sequence to “ABC” or
“ACB”. Press the “OK”
soft key to save the
setting.
If the parameter has
been changed and
after the User presses
the “OK” soft key, an
asterisk will appear
next to the changed
parameter.
To save the parameter
change, press the
“OK” soft key again
(see Section 2: Saving
Parameters.