Eaton Lighting Systems EG2-NA 9850-000225-02 4
Product Overview
Mounting
Location and spacing
The EG2-NA should be installed in a dry
ventilated location, where ambient conditions
are maintained within the requirements of the
unit.
The unit has ventilation slots on its sides
to allow convection cooling and under no
circumstances should these be blocked.
Allow 50mm (2”) above and below the unit if
trunking with a depth greater than 50mm (2”)
is used.
Mounting Holes
The unit is provided with four 6mm (1/4in)
diameter fixing holes for wall mounting.
The mounting holes can be accessed by
undoing the four screws on the front cover and
removing it.
1. Ethernet Connection
2. CAN ID Button
3. iCAN Network Connector with a green
(power) and yellow (network activity) LED
4. Main Supply Terminal Block
5. Power Supply
6. Reset Button
1
2
3
4
5
6
6.89” (175mm)
7.09”
(180mm)
0.25" (6.35mm)
Mounting Holes
4-Off.
