Eaton Lighting Systems EG2-NA 9850-000225-02 3
Introduction
The Ethernet Gateway provides a connection
between an iLumin or iLight lighting control
network and an Ethernet Local Area Network,
either through an Ethernet switch or wireless
router.
The EG2-NA acts as a host for the iLumin or
iLight series of remote applications including
iOS (iPhone/iPod Touch/iPad & Android OS
devices). Coupling the EG2-NA to a Wi-Fi
network enables secure scene control,
visual feedback and modification from your
hand held device. Once configured, the
EG2-NA automatically loads room and scene
information to the connected hand held
device.
In addition to its handheld device capability,
the EG2-NA houses internal webserver pages
that allow for basic scene control functions.
These internal pages are accessed through an
internet browser and are password protected
for security.
The EG2-NA also facilitates the commissioning
of the iLumin or iLight system, allowing our
factory trained technicians to use the EG2-NA
connection to configure the control system on
a LAN or Wi-Fi enabled PC or via the internet
rather than by connecting directly into the
iLumin or iLight network.
Weight
•
Packed: 2.6 kg (5.7 lbs)
•
Unpacked: 2.4 kg (5.3 lbs)
Dimensions
Specification
Unit requires: 120-240 VAC 50/60 Hz 0.45A 1Ø
Maximum
iCAN network connection
Ethernet connection: Fully transformer isolated
Ambient temperature range: 0°C to 40°C
(32°F to 104°F)
Humidity: 20% to 90% non-condensing
Configuration and sequence memory
Field upgradable FLASH program memory
In15 VDC, 2A power supply
