Eaton easySafety, Manual

Page: 146 / 695

Wiring with ea s ySafety
142
02/16 MN05013001Z EN
Switching with the cursor buttons
The easySafety device allows the four cursor buttons also to
be used as permanently wired inputs in the standard circuit
diagram.
The buttons are wired in the standard circuit diagram as
contacts
P 01
to
P 04
. The P buttons can be activated and
deactivated in the
h
STD-PARAMETER
h
System menu.
The P buttons can be used for testing standard circuits or for
manual operation. The P button function is a useful aid for
service and commissioning tasks.
Example 1
This standard circuit diagram example enables a lamp at
output QS1 to either be switched on or off via the inputs IS1
and IS2 or via the cursor buttons
ÍÚ
.
Figure 54: Switch QS1 via IS1, IS2,
Í
, or
Ú
Example 2
In this example of a standard circuit diagram output QS1 is
actuated through input IS1. Input IS5 switches to cursor
operation and decouples current path
IS01
through
M
01
.
Figure 55: IS5 switches to cursor buttons.
The display in the status menu shows whether the P buttons
are used in the standard circuit diagram.
P01
P02
P03
P04
IS01--
u
------------------------S QS01
P 02--
k
IS02--
u
------------------------R QS01
P 04--
k
IS05--------------------------S M 01
IS01----
M
01--
u
---------------S QS01
P 01----M 01--
k
h
The easySafety device only evaluates P button entries if
the status display is shown.