0 About this Manual
0.1 Target group
easy800-BLT-ADP Bluetooth adapter
07/12 MN04902002Z-EN
www.eaton.com
3
0 About this Manual
This manual explains how to install and commission the easy800-BLT-ADP
Bluetooth adapter.
The current edition of this manual in other languages can be obtained from
the Internet
http://www.eaton.com/moeller
￫
Support
by entering “Bluetooth“ in the Quick Search box.
0.1 Target group
This operator manual is intended for people who want to establish communi-
cations between a computer and an easy800-Standard, EC4P, or MFD con-
trol relay. Once communications are established, it will be possible to do the
following with the computer:
•
Transfer applications to the device
•
Test or commission applications
•
Maintain applications
•
Diagnose faults
The easy800-BLT-ADP Bluetooth adapter must be installed and connected by
an electrician or an individual who is familiar with the installation of electrical
equipment.
0.2 Exclusion of liability
All information in this manual was provided by us to the best of our knowl-
edge and belief and in accordance with the current state-of-the-art. However,
this does not exclude the possibility of inaccuracies so that we cannot accept
any liability for the accuracy and completeness of the information. In particu-
lar, this information does not guarantee any particular properties.
The devices described here may only be operated in conjunction with this
operator manual. Installation, commissioning, operation, maintenance and
refitting of the devices must only be carried out by qualified persons. The
devices must only be used in the areas recommended and only in conjunc-
tion with third-party devices and components that have been approved by us.
Their use is allowed fundamentally only in technically faultless condition.
Fault-free and safe operation of the system requires proper transport, stor-
age, installation and commissioning as well as careful operation and mainte-
nance.
