Eaton DS7 Series, Manual

Page: 219 / 240

9 Appendix
9.1 Standards
DS7 Soft starter 09/16 MN03901001Z-EN www.eaton.com
215
9 Appendix
9.1 Standards
The relevant standards for the DS7 soft starters are listed below:
Table 45: Standards and EMC
9.2 Applicable product standards and approvals
UL certification
All sizes of soft starters from the DS7 series are now UL certified:
Certificate Number 20120406-E251034
Report Reference E251034-20110330
Issue Date 2012-APRIL-06
Learn more:
www.UL.com
.
Standard type Standard Titles Limit Values
Model IEC/EN 60947-1 (EN 60529) IP20
Interference immunity IEC/EN 60947-4-2 Electrostatic discharge 8 kV air discharge
4 kV Contactdischarge
Performance criterion 2
Electromagnetic fields
Frequency range 80 to 1000 MHz 10 V/1 m
Performance criterion 1
High frequency field
Frequency range 0.15 to 80 MHz, 80 %
amplitude modulated 140 dB ( μ V)
Performance criterion 1
Fast transients,
Burst on power terminals 2 kV/5 kHz
Performance criterion 2
Burst on bus and control cables 1 kV/5 kHz
Performance criterion 2
Surge voltage test, supply cable 2 kV phase - earth
1 kV phase - phase
Performance criterion 2
Immunity testing for voltage dips, brief
interruptions, and voltage fluctuations DS7-340…: Performance criterion 1
DS7-342…: Performance criterion 2
DS7-34D…: Performance criterion 2
Emitted interference IEC/EN 60947-4-2 Radio interference, housing and supply
system Class A for use in industrial environment
Insulation resistance IEC/EN 60947-1 Insulation resistance test Appendix K
Permissible pollution IEC/EN 60947-1 Insulation of air and creepage distances Degree of pollution 2
Permissible humidity rating IEC/EN 60947-1 Relative humidity 85 %, no condensation
Document type Name
Product standard EN/IEC 60947-4-2
Approvals • UL (UL 508)
• CSA (CSA C22.2 No 14-05)
• CCC (GB 14048.6)
• Gost
• Gost-R
Markings • CE marking for LVD (Low-Voltage Directive)
• EMC (Electromagnetic compatibility - EMC Directive)