Eaton DIN500AC, Advanced User'S Manual

Page: 6 / 69

Eaton Din Rail UPS Advanced User Guide 9340DC—Rev A 3
C Chhaapptteerr 22 IInnttrroodduuccttiioonn
22..11 O Ovveerrvviieew w
The DIN500AC and DIN850AC are compact, DIN rail mountable standby UPS systems, which provide
conditioned power to sensitive electronic equipment in industrial environments. They supply connected
equipment with stepped approximation to sine wave input during power outages to simulate the power
generated by the utility.
Battery charging occurs automatically when AC power is applied, so there is no need to switch on the UPS. The
DIN500AC/DIN850AC also includes an automatic self-test feature to test the UPS function and battery. When
used with PowerAlert® Office, your UPS will record the events on the Event Log and immediately switch to AC
Mode to provide load power if AC mains is available from utility. Other key features include:
• User-replaceable battery
• Auto-restart during AC recovery
• AC overload protection
• Over temperature thermal protection
• Battery overcharge protection
• Input voltage out-of-range protection
• Power lock feature, ensuring the UPS must be connected to utility on initial startup after unboxing
• Battery Independent AC pass-through feature allows the UPS to power the load with AC in event of
battery failure
• Input and output reverse protection feature
• Enable/disable UPS remotely via remote on/off terminal
• Battery life monitoring and routine test for preventive maintenance
• Long design life battery with up to 12 years at 77°F (25°C) operation
22..22 P Paacckkaaggee C Coonntteennttss
Please find the following items included with the purchase of the DIN500AC and the DIN850AC:
Table 1. Box Contents
DIN500AC DIN850AC
• DIN500AC AC DIN Rail backup UPS
• USB Communications cable
• Safety card
• Quick start guide
• DIN850AC AC DIN Rail backup UPS
• USB Communications Cable
• Safety Card
• Quick Start Guide