9
Instruction Book
IB182917EN September 2018 www.eaton.com
DHP-VR
+
VR-Series
+
Replacement Circuit Breaker
SECTION 3: RECEIVING, HANDLING, AND
STORAGE
VR-Series
+
circuit breakers are subjected to complete factory
production tests and inspection before being packed. They are
shipped in packages designed to provide maximum protection to the
equipment during shipment and storage and at the same time to
provide convenient handling. Accessories such as the maintenance
tool, code plate, (if applicable) etc. are shipped with the circuit
breaker.
3.1 RECEIVING
Until the circuit breaker is ready to be delivered to the switchgear
site for installation, DO NOT remove it from the shipping crate. If the
circuit breaker is to be placed in storage, maximum protection can
be obtained by keeping it in its crate.
Upon receipt of the equipment, inspect the crates for any signs of
damage or rough handling. Open the crates carefully to avoid any
damage to the contents. Use a nail puller rather than a crow bar
when required.
When opening the crates, be careful that any loose items or
hardware are not discarded with the packing material. Check the
contents of each package against the packing list.
Examine the circuit breaker for any signs of shipping damage
such as broken, missing or loose hardware, damaged or deformed
insulation and other components. If damaged or loss is detected,
file claims immediately with the carrier and notify an Eaton
representative.
Tools and Accessories
Mainttnanct Tool (Stylt# 94C9506G01)e:
This tool is used to
manually charge the closing springs. One maintenance tool is
provided with each vacuum replacement circuit breaker.
Racking Handlt (Stylt# 509A931G01)e:
Optional racking handle
used to drive the racking mechanism which moves the circuit
breaker into and out of the circuit breaker compartment. The OEM
racking handle will interface with the
VR-Series
+
replacement circuit
breaker racking mechanism and is therefore not provided as part of
the vacuum replacement circuit breaker.
Lifting Strap (Stylt# 94B1194G01)e:
Optional item recommended
for lifting the DHP-VR
+
circuit breaker.
Turning Dolly (Stylt# 94A9502G02)e:
Optional item used to
help maneuver circuit breaker when out of the circuit breaker
compartment.
Figurt 3.1.a. Mainttnanct Tool
Figurt 3.1.b. Rotary Racking Handlt
Figurt 3.1.c. Turning Dolly
