IM05805001K
29
Effective November 2003
LMR Configuration Checklist
Confirm all settings below…
Date & Time
Weekly Run Timer - (If required)
Run Period Timer
Acceleration Timer - (reduced voltage models only)
Fail to Start Timer
Pressure Start Point
Pressure Stop Point
Low Pressure Alarm
Pressure
Deviation
Sequential Start Timer
Enable/Disable Manual Stop as per requirements
Overvoltage
Undervoltage
Set “Print Status Report” to YES.
Before Leaving Site
Test printer by printing Status Report - and keep for your records.
Dump all printer messages contained in the memory.
(Hit time/print button for 3 seconds while printing - hit reset button until memory
is cleared).
Summary of Contents for Cutler-Hammer LMR
