background image

 

© 2005 Eaton Corporation
All Rights Reserved
Printed in USA
Publication No. TD05301002E/CPG
October 2005

 

Eaton Electrical Inc.
1000 Cherrington Parkway
Moon Township, PA 15108-4312
USA
tel: 1-800-525-2000
www.EatonElectrical.com

Summary of Contents for Cutler-Hammer iProx Series

Page 1: ... The disadvantage of this solution is that your choice of sensing range and body style is usually very limited The DC versions of iProx have three different noise immu nity settings while the AC versions have two settings See Figures 3 4 5 and 6 for optimum noise immunity settings based upon center to center spacing between mounted sen sors Note that in some cases more than one noise immu nity set...

Page 2: ...nu 3 If using the Remote Programmer affix the magnetic puck to the face of the iProx sensor If using the Tray Pro grammer securely mount the iProx sensor s in the pro gramming receptacles To ensure proper mounting it may be necessary to remove the mounting nuts from the sensor Diameter D Side by Side High Noise Immunity Factory Default 12 mm Shld 0 25 mm at 50 Hz 0 mm Infinity at 10 Hz 50 mm Infin...

Page 3: ...dify click the drop down menu and select the sensor you want to modify It may take a few seconds to communicate with the sen sor Once this is complete the rest of the screen should become enabled allowing you to modify the parame ters of the selected sensor 8 Under the Response Time Noise Immunity section at the top right of the screen drag the slider until you see the Side by Side value enabled 9...

Page 4: ... Corporation All Rights Reserved Printed in USA Publication No TD05301002E CPG October 2005 Eaton Electrical Inc 1000 Cherrington Parkway Moon Township PA 15108 4312 USA tel 1 800 525 2000 www EatonElectrical com ...

Reviews: