Maintenance information
WARNING
This equipment requires routine inspection and
maintenance to ensure proper operation . If it is not
maintained it may fail to operate properly . Improper
operation can cause equipment damage and possible
personal
injury .
G105 .1
Maintenance program
A routine maintenance inspection program is required to
ensure proper operation of the equipment. Detailed service
records should be recorded in the unit’s inspection and
maintenance record log. Refer to Tables 1 and 2 for typical
operating characteristics of the DC Motor Operator Control.
Table 1 . DC motor operator ratings
Close
max.
(amps)
Open
max.
(amps)
Running load amperage (RLA)
12
12
Lock rotor amperage (LRA)
24
23
In rush
20
19
Table 2 . DC motor operator-operating characteristics
Close
(secs.)
Open
(secs.)
Min.
Avg.
Max.
Min.
Avg.
Max.
Motor run time
4
12
4
7
Device time (RVAC)
5
5
Device time (VFI)
5
5
Replacement parts
Replacement parts for the DC Motor Operator Control are
available through the factory Service Department. To order
parts, contact your Eaton representative for additional
information and ordering procedures.
10
OPERATION INSTRUCTIONS
MN285018EN May 2017
DC motor operator control installation and operation instructions
