INS #
Brand Logo
reversed out of
black
INS #
IB500004EN
Installation Instructions - Galleon Quick Connect Arm
Instructions d’installation - Bras à connexion rapide Galleon
Instrucciones de instalación - Brazo de conexión rápida Galleon
WARNING
Customer is responsible for engineering analysis
to confirm pole and fixture compatibility for all
applications. Serious bodily injury or property damage
may occur if the pole mounted luminaire is not
installed to a compatible new or existing pole specific
to the conditions of your installation and physical
location. Refer to our pole white paper WP513001EN
for additional support information.
WARNING
Make certain power is OFF before starting installation
or attempting any maintenance.
WARNING
Risk of fire/electric shock. If not qualified, consult an
electrician.
WARNING
Risk of Electric Shock – Disconnect power at fuse or
circuit breaker before installing or servicing.
WARNING
Risk of Burn – Disconnect power and allow fixture to
cool before servicing.
WARNING
Risk of Personal Injury – Fixture may become damaged
and/or unstable if not installed properly.
●
●
Do not mount luminaire within 6” of a combustible
surface.
●
●
Do not handle luminaire by the glass. Do not touch
LEDs.
NOTE:
These instructions do not claim to cover all details
or variations in the equipment, procedure, or process
described, nor to provide directions for meeting every
possible contingency during installation, operation or
maintenance. When additional information is desired
to satisfy a problem not covered sufficiently for user’s
purpose, please contact your nearest representative.
NOTE:
This lighting fixture has been shipped complete
with one of several mounting options. Please follow the
installation instructions specific to the catalog part that you
ordered.
NOTE:
Care must be taken not to set lighting fixture down
on optical lenses or lift the fixture in the lens area.
NOTE:
Specifications and dimensions subject to change
without notice.
IMPORTANT:
Read carefully before installing fixture. Retain for future reference.
GENERAL:
Upon receipt of the fixture, thoroughly inspect for any freight damage which should be brought to the
attention of the delivery carrier. Compare the catalog description listed on the packing slip with the fixture label on the
housing to assure you have received the correct material.
SAFETY:
This fixture must be wired in accordance with the National Electrical Code and applicable local codes and
ordinances. Proper grounding is required to insure personal safety. Carefully observe grounding procedure under
installation section.
APPLICATIONS:
This lighting fixture is designed for outdoor lighting services, and should not be used in area of limited
ventilation or inside high ambient temperature enclosures. It must be stored in a dry location prior to installation. Do
not expose lighting fixture to rain, dust or other environmental conditions prior to installation and insertion of photo
control or shorting cap (if so equipped). Do not install the fixture near combustible materials or locate next to airflow
blocking surfaces within 6 inches. Best results will be obtained if installed and maintained according to the following
recommendations.
Summary of Contents for Cooper Lighting Galleon
Page 21: ...15 14...
