Eaton Bussmann Quik-Spec, Instruction Leaflet

Page: 3 / 12

3A1341RevB 3
Cooper Bussmann Power Module™ Switch
Hazardous Voltage
Will cause severe injury or death.
Working on or near energized circuits poses a serious risk of
electrical shock. De-energize all circuits before installing or
servicing this equipment and follow all prescribed safety
procedures.
IMPORTANT
These procedures do not claim to cover all possible details or variations encountered with
the Power Modules™ Switch elevator disconnect. Nor do they provide for all possible
conditions that may be encountered. If further information is desired or needed to address
any particular issue not covered in this document, contact your Cooper Bussmann
representative. The information in this document does not relieve the user from exercising
good judgment, nor from using sound safety practices.
Note: Because Cooper Bussmann has a policy of continuous product improvement, we
reserve the right to change design specifications without notice. Should a conflict arise
between the general information in this document and the contents of drawings or
supplementary material, or both, the latter shall take precedence. For the latest version of
this Instruction Leaflet, download "Instruction Leaflet" from the Cooper Bussmann website
at: www.cooperbussmann.com/PowerMod.
The contents of this Instruction Leaflet are not part of, nor do they modify, any prior or
existing agreement, commitment or relationship. The Cooper Bussmann terms and
conditions of sale constitute the entire obligation of Cooper Bussmann. The warranty in the
terms and conditions of sale is the sole warranty of Cooper Bussmann. Any statements in
this document do not create new warranties or modify any existing warranty.
QUALIFIED PERSON
For the purpose of this Instruction Leaflet, a qualified person:
(a) is familiar with the subject equipment and the hazards involved with their application,
use, administration and maintenance.
(b) is trained and authorized to de-energize, clear, ground, and tag circuits and
equipment in accordance with established safety practices.
(c) is trained in the proper care and use of personal protective equipment such as
rubber gloves, hard hat, safety glasses or face shields, arc flash clothing, etc., in
accordance with established safety practices.
(d) is trained to render first aid.
(e) has received safety training to recognize and avoid the hazards involved.
(f) has the skills and knowledge pertaining to the construction and operation of this
equipment and its installation.