Eaton ARRAY 3A3 Pro, Manual

Page: 78 / 103

23
Chapter 8 Menu Commands
8.1 Function description on menu commands
Menu list Description
Home Display the menu bar and system status simulation diagram.
Meters Used for viewing the meters types: System Meters, Module Meters and Battery Meters.
Control Provides power control command. Control the Startup, Shut Down of UPS and Battery Test.
Logs
View the current and historical UPS alarm fault information through “Logs”, and the historical logs can
be cleared.
Setting Used for UPS setting and maintenance.
About
Used for users and maintenance personnel to view the software version numbers of all modules and
system information; and also provide the maintenance time remainders.
Submenu item Function description
Meters
System Meters Display the three-phase input/bypass/output voltage and frequency meters.
UPM Meters
Display the current status of each module. The status corresponding to
module color is in accordance with that shown in the Home.
Battery Meters
Display the status, voltage, current and capacity of positive and negative
batteries.
Set battery current detection as disable in “Setting”à”Service” à”Battery
Configuration”, then there is no content of battery current displayed in
Battery Parameter Interface.
Control System Control
Switch the operation status of UPS system and perform the battery test,
such as Startup, Shut Down and Switching to Bypass, Shut Down and
Battery Test.
Logs
Active Event
Display the information on Active Event, Including Event ID, Name and
Type.
System Logs
Display the information on System Logs, Including Time, Event ID,
Name, Source, Type; Service Password is required to enter it.
Clear lLgs Entering service password can clear all the event logs.
Setting Configuration
Language Selection Set the language type: simplified Chinese and English.
Machine Name
The name is set not more than 14 characters. The keyboard is a system
built-in text keyboard.
System tTme Set the date and time displayed on LCD panel of UPS system.
Battery Test Obtain the battery information via the battery test.
Screensaver Time Set the screensaver time. When it is out of the set range with no actions,
turn off the backlight and enter the screensaver status.
Light Test Undergo the light test.
LCD backlight Set the brightness of LCD backlight.