Eaton ARRAY 3A3 Pro, Manual

Page: 76 / 103

21
7.3 Turning off the UPS
②
On the system control interface, click the “Start” button to pop up a confirmation prompt box. After click-
ing OK, if the system meets the startup conditions, the startup is successful and the startup button turns to
green.
①
Enter the Home and click the “Control” button to enter the login interface. Type the correct control pass-
word or user password, click the ENTER key and then click the“Enter” button to enter the system control
interface;
①
Enter the Home and click the “Control” button to enter the login interface. Type the correct control pass-
word or user password, click the ENTER key and then click the“Enter” button to enter the system control
interface;
If the control password is set to the enabled status, the
password is required to enter the system control interface.
The default control password and user password are 1111
and 1234 respectively.
If the control password is set to the disabled status, click
the “Control” button on the Home menu bar to directly en -
ter the system control interface.
If the control password is set to the enabled status, the
password is required to enter the system control interface.
The default control password and user password are 1111
and 1234 respectively.
If the control password is set to the disabled status, click
the “Control” button on the Home menu bar to directly en -
ter the system control interface.
Meters Home
Please input password Entr y
Normal
Control
Settings Logs
About
Load :
Meters Home
Please input password
Entr y
Normal
Control Settings
Logs
About
Load :
If the system fails to meet the startup conditions, the
prompt box will be popped up to show message on opera-
tion prohibited as follows:
Button Message on operation prohibited
Startup
1. No UPM or UPM has no power,cannot go Online!
2. EPO is active,cannot go Online!
3. UPM is unlock or switchgear is open,cannot go
Online!
4. Maintenance cover is open,cannot go Online!
Run Test
Last Test Time 2012/12/05 Result Pass ： ：
Battery Test
Bypass
Shut Down
Start Power Status
Meters
Normal
Control
Settings Logs
About
Load :
Load :
Home