Eaton Ampgard AR, Instruction Booklet

Page: 11 / 32

11
Instruction Booklet IB48088
Effective July 2021
Instructions for Eaton’s 7.2 kV Ampgard AR
(arc resistant motor control center)
(Compliant to IEEE C37.20.7-2017)
EATON
www.eaton.com
Section 4: Common configurations
The Ampgard AR can be configured in one of the following ways
shown below:
Figure 13
. Exhaust duct exiting the plenum.
Figure 14 . Exhaust duct manifold (side[s] ONLY).
Figure 15 . Closed coupled with Eaton VacClad switchgear.
Back-to-back (B2B).
Figure 16
. Closed coupled with Eaton VacClad switchgear.
Front aligned (FA).
Figure 17 . Closed coupled with Eaton VacClad switchgear.
Rear aligned (RA).
Figure 19
. Closed coupled with Eaton SC9000.
Figure 13. 50 kA arc resistant line-up. (Shown with exhaust ducts exiting from the front.)