Shelf installation
1. Install four #10-24 x
1
/
2
" Phillips head screws
(provided) at the desired location for the shelf
in the End Panels as shown in figure 8. Do not
screw them in all the way; they should protrude
approximately
1
/
8
".
2.
Position the Shelf between the End Panels above
the screws. See figure 9a. Align the front slots
in the shelf with the screws at the front of the
End Panels and push the shelf back towards the
rear of the cabinet. Lower the rear of the shelf to
engage the rear slots with the screws. See figure
9b. Tighten all screws to secure the shelf.
4
91212
L a b S l i d i n g D o o r
C o m p a r t m e n t
I n s t a l l a t i o n
SHELF INSTALLATION
1. Install four #10-24 x 1/2” Phillips head screws
(provided) at the desired location for the shelf in the
End Panels as shown in figure 8. Do not screw them
in all the way; they should protrude approximately
1/8”.
2. Position the Shelf between the End Panels above
the screws. See figure 9a. Align the front slots in the
shelf with the screws at the front of the End Panels
and push the shelf back towards the rear of the
cabinet. Lower the rear of the shelf to engage the
rear slots with the screws. See figure 9b. Tighten all
screws to secure the shelf.
End Panel
Figure 8
1/8”
#10-24 x 1/2” phillips
head screws
End Panel
Shelf
Figure 9a
Shelf
Front slot
Rear slot
Screw
End Panel
Figure 9b
4
91212
L a b S l i d i n g D o o r
C o m p a r t m e n t
I n s t a l l a t i o n
SHELF INSTALLATION
1. Install four #10-24 x 1/2” Phillips head screws
(provided) at the desired location for the shelf in the
End Panels as shown in figure 8. Do not screw them
in all the way; they should protrude approximately
1/8”.
2. Position the Shelf between the End Panels above
the screws. See figure 9a. Align the front slots in the
shelf with the screws at the front of the End Panels
and push the shelf back towards the rear of the
cabinet. Lower the rear of the shelf to engage the
rear slots with the screws. See figure 9b. Tighten all
screws to secure the shelf.
End Panel
Figure 8
1/8”
#10-24 x 1/2” phillips
head screws
End Panel
Shelf
Figure 9a
Shelf
Front slot
Rear slot
Screw
End Panel
Figure 9b
4
91212
L a b S l i d i n g D o o r
C o m p a r t m e n t
I n s t a l l a t i o n
SHELF INSTALLATION
1. Install four #10-24 x 1/2” Phillips head screws
(provided) at the desired location for the shelf in the
End Panels as shown in figure 8. Do not screw them
in all the way; they should protrude approximately
1/8”.
2. Position the Shelf between the End Panels above
the screws. See figure 9a. Align the front slots in the
shelf with the screws at the front of the End Panels
and push the shelf back towards the rear of the
cabinet. Lower the rear of the shelf to engage the
rear slots with the screws. See figure 9b. Tighten all
screws to secure the shelf.
End Panel
Figure 8
1/8”
#10-24 x 1/2” phillips
head screws
End Panel
Shelf
Figure 9a
Shelf
Front slot
Rear slot
Screw
End Panel
Figure 9b
Figure 8
Shelf
End panel
End panel
Screw
Shelf
Front
slot
Rear slot
End panel
Figure 9a
Figure 9b
#10 - 24 x
1
∕
2
" phillips
head screws
