Form ML-318
Revised Sept ember 3, 1997
Eaton Corporation
Airflex Division
9919 Clinton Road
Cleveland, Ohio 44144
Printed in U.S.A.
EATON PRODUCT WARRANTY
Subject to the conditions stated herein, Eaton
Corporation w arrants to the Purchaser that
each new Airflex Product manufactured by
Eaton w ill be free from failures caused by
defects in material and w orkmanship, and w ill
deliver its rated capacity, for a period of tw elve
(12) months from the date of shipment to
Purchaser, provided such Product is properly
installed, properly maintained, operated under
normal conditions and w ith competent
supervision. Warranty claims shall be made in
w riting and the part or parts shall, if requested
by Airflex Division, be returned prepaid to the
Airflex Division for inspection. Upon a
determination that a defect exists, Eaton shall
thereupon correct any defect, at its option
either by repairing any defective part or parts
or by making available at Eaton’s plant a
repaired or replacement part. This w arranty
does not extend to normal w ear parts or
components of the Product, such as friction
material and friction surfaces.
LIMITATION OF WARRANTY
THE FOREGOING WARRANTY IS
EXCLUSIVE AND IN LIEU OF ALL OTHER
WARRANTIES WHETHER WRITTEN, ORAL
OR IMPLIED. ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE ARE SPECIFICALLY
EXCLUDED.
In no event shall Eaton be liable for special,
incidental or consequential damages. Eaton’s
liability arising out of the supplying of such
Product, or its use, whether in w arranty,
contract or otherw ise, shall in no case exceed
the cost of correcting defects in the Products
as herein provided. Upon expiration of the
twelve (12) month period, all such liability shall
terminate. THE FOREGOING SHALL
CONSTITUTE THE SOLE REMEDY OF
PURCHASER AND THE SOLE LIABILITY OF
EATON.
