manualshive.com logo in svg

Eaton 93PS-8(20)-20(-C), User And Installation Manual, Page: 79 / 104

Share
Download
Eaton 93PS-8(20)-20(-C) User And Installation Manual Download Page 79

Main menu

Submenu

Functions

Mimics

UPS mimics

An overview of the UPS operation, including informa-

tion on load, efficiency and consumption. If there is

an error, an error indicator is displayed next to the af-

fected part. Active events log can be opened by tap-

ping the error indicator.

UPS module

map

Module map shows the status of each UPM.

System over-

view

System overview shows the status and meters sum-

mary for each UPS.

ESS

The ESS mimic screen shows the approximated con-

sumption and energy savings of the ESS mode.

Logs

Active events

All active events are displayed.

System log

A log of all system events.

Service log

A detailed log of UPS operations.

Change log

A log of all changed settings and their values.

Statistics:

UPS, Battery

Statistics sum-

mary

A summary of UPS statistics

Statistics details Details are available by pressing on different statis-

tics.

Settings

User Configura-

tion Service

Configurable user settings. For details, see Section 

7.1.4.1

.

7.1.4.1

 User settings

The UPS has the following settings that are user-modifiable. In the Home

screen, select Settings.

Table 15: User settings

Setting

Description

Information

Information on the UPS model, including part number and serial

number.

About

Version information.

To modify the Configuration settings, you need to sign in.

Table 16: Configuration settings

Setting

Description

Language

Change the user interface language.

Unit Name

Change the unit name.

Clock

Change the date and time, change the clock format or enable/

disable NTP clock setup.

GSM

GSM modem.

Call Service

Send automatic e-mail to the service center in case of a failure.

Eaton 93PS UPS 8–40 kW

User's and installation guide

©

 Eaton Corporation plc 2016. All rights reserved.

Revision: 003

Document ID: P-164000493

79 (104)

Summary of Contents for 93PS-8(20)-20(-C)









































































































Reviews:

No comments