Eaton 93E 30IAC-D, Installation And Operation Manual

Page: 36 / 76

Installation
4-2 Eaton 93E Integrated Accessory Cabinet-Distribution (30IAC-D and 60IAC-D) Installation and Operation Manual P-164000072—Rev 2 www.eaton.com/powerquality
Figure 4-1. Removing the Front Shipping Bracket – 93E 30IAC-D
4. Remove four bolts securing the front shipping bracket to the cabinet and four bolts securing the bracket to
the pallet (see Figure 4-1). Remove the front shipping bracket. If installing the cabinet permanently, retain
the shipping bracket and securing hardware for later use.
5. Remove four bolts securing the rear shipping bracket to the cabinet and four bolts securing the bracket to
the pallet (see Figure 4-2). Remove the rear shipping bracket. If installing the cabinet permanently, retain
the shipping bracket and securing hardware for later use.
6. Close the door and secure the latch before rolling the cabinet from the pallet.
7. Remove three bolts securing the removable skid (see Figure 4-2).
8. Remove two bolts securing the pallet extension plate to the pallet and remove the plate (see Figure 4-1).
9. Install the pallet extension plate onto the rear of the pallet using the retained bolts (see Figure 4-3). Use
the mounting holes provided in the pallet (see Figure 4-2).
10. If necessary, use a forklift or pallet jack between the supports on the bottom of the pallet to lift the pallet
by approximately 3 mm (1/8") and remove the skid (see Figure 4-2).
Front Door
Shipping Bracket Bolts
Shipping Bracket Bolts
Pallet Extension Plate
(installed for shipping)
Pallet
Front Shipping Bracket