7
Series 26 - Model 26000 Multiple Gear Pump
20 Tap
front adapter plate with a soft faced hammer to loosen
and remove adapter plate. After removing adapter, turn it over
and remove the
second o-ring seal.
21 Remove
first pump body from front plate.
22 Remove
first pump idler gear and input drive gear
assembly along with wear plate and o-ring seal from front
plate.
15 Remove
second or middle pump body from second set of
gears.
16 Remove
idler gear assembly from wear plate and drive
gear from input shaft.
17 Remove the next (second)
wear plate assembly from the
adapter.
18 Next, use a pencil magnet to remove the
second drive key
from the pump shaft.
19 Remove the
o-ring seal from the front adapter plate.
