6
Series 26 - Model 26000 Multiple Gear Pump
Disassembly
8
To separate the
third pump body from adapter plate use a
soft faced hammer and tap to loosen and then lift straight up.
9
Remove
idler gear assembly from wear plate and adaptor
plate.
10 Remove
drive gear from input shaft.
11 Remove
wear plate and o-ring seal, noting position of
open or closed side of wear plate.
12 Using a pencil magnet remove the
drive gear key from the
drive shaft.
13 Using a o-ring pick or similar tool and remove the
o-ring
seal from the rear adapter plate.
14 Tap rear
adapter plate with a soft faced hammer to loosen
and remove adapter plate. After removing adapter, turn it over
and remove the
second o-ring seal.
