Eaton 1000H(XL), User Manual

Page: 6 / 40

３
Hazardous voltages may occur between the battery terminals and the ground. Verify that no
voltage is present before servicing!
★
Batteries have a high short-circuit current and pose a risk of shock. Take all precautionary
measures specified below and any other measures necessary when working with batteries:
－
remove all jewellery, wristwatches, rings and other metal objects
－
use only tools with insulated grips and handles.
★
When changing batteries, replace with the same quantity and the same type of batteries.
★
Do not attempt to dispose of batteries by burning them. It could cause explosion.
★
Do not open or destroy batteries. effluent electrolyte can cause injury to the skin and eyes. It
may be toxic.
★
Please replace the fuse only by a fuse of the same type and of the same amperage in order
to avoid fire hazards.
★
Do not dismantle the UPS, except the qualified maintenance personnel.
1. Safety and EMC instructions
1.4 Transport
★
Please transport the UPS only in the original packaging (to protect against shock and
impact).
1.5 Storage
★
The UPS must be stockpiled in the room where it is ventilated and dry.
1.6 Standards
Only the units with CE markings are comply with the following standards:
◇
For 1000H(XL) / 2000H(XL) / 3000H(XL)
* Safety
IEC/EN 62040-1-1
* EMI
Conducted Emission...............................:IEC/EN 50091-2 CLASS B
Radiated Emission..................................:IEC/EN 50091-2 CLASS B
Harmonic Current....................................:IEC/EN 61000-3-2
Voltage Fluctuation and Flicker...............:IEC/EN 61000-3-3
*EMS
ESD........................................................:IEC/EN 61000-4-2 Level 4
RS..........................................................:IEC/EN 61000-4-3 Level 3
EFT.........................................................:IEC/EN 61000-4-4 Level 4
SURGE..................................................:IEC/EN 61000-4-5 Level 4
Low Frequency Signals.........................:IEC/EN 61000-2-2