ICUS CONDENSING UNIT INSTALLATION MANUAL
Jan 09:F\Qualitair Eng\Icu\Manuals\0412118S
9
6. POWER & CONTROL CONNECTIONS Cont
6.1
Wiring-up the Unit
Electrical terminations should be made onto the screw terminal side of the outdoor unit terminal blocks.
6.2
Wiring Requirements
Power supply – Connection of isolation power supply to the outdoor unit.
Interconnecting Wiring – Power and signal cables run between outdoor and indoor unit.
Details of the fuse ratings and cable requirements are given in the tables in Section 5 Page 7,
of this manual.
6.3
Terminations
Details of cable terminations and interconnections are given in Table 6.1.
6.4
Wiring Diagrams
These are fitted to the inside of the access door.
SPECIAL NOTES :
REFER TO KIT INSTRUCTIONS FOR ELECTRICAL CONNECTION OF SITE OPTION KITS!!
DO NOT MEGGER OR FLASH TEST WITH ELECTRONIC PCB’S IN CIRCUIT!!
INDOOR AND OUTDOOR UNITS SHOULD HAVE LOCAL ELECTRICAL ISOLATORS.
