3. Platter installation
Install the
platter (2)
on the
sub-platter
(14)
.
3a. Adjusting the pulley height
In rare instances, you may have to adjust the pull
e
y height if it taps against the
platter:
4.
Tonearm assembly
The tonearm includes a combination of Cardan and unipivot bearings, immersed in special
damping fluid. See the next steps to set up your tonearm
.
Carefully remove record clamp, platter and drive belt from the turntable.
Using a small flathead
screwdriver,
loosen
the
small screw and move the pulley to the desired position.
Tighten the screw back and fit the drive belt, platter and record clamp.
8
