Setup
1. Transport screws
Remove the three
transport screws (15)
from the carbon part of the chassis before
installing the
sub-platter
(14)
, the
drive belt (13)
and the
platter (2)
.
The transport screws
are used to ensure safe shipping and transport, and should
be reinstalled prior to any future shipment or transportation of the turntable.
2. Sub-platter and drive belt installation
!
Remove the protective cover from the
sub-platter (14)
. Install the sub-platter (14) and
the
drive belt (13)
as shown in the following illustrations.
7
