7
Toxin | Installation & Service Manual
Setting the Controller
(Cont’d)
SETTING THE CURRENT TIME OF DAY
This method is also used to reset correct time of day in the event of a power outage lasting over
48 hours.
a. Press CLOCK button.
b. Press Up or Down button until the display shows the current hour. Scroll past 12 to
toggle to PM.
c. Press NEXT button.
d. Press UP or Down button until the display shows the current minutes.
e. Press the NEXT button to exit and resume normal operation.
SCHEDULING AN EXTRA REGENERATION TONIGHT
This will give your filter full capacity should you expect much higher than normal water usage
tomorrow.
a. Press the REGEN button.
b. The words “Regen Today” will flash on the display to indicate that the system will
regenerate tonight at the normal set time (typically 12:30am).
SCHEDULING A REGENERATION IMMEDIATELY
Water conditions fluctuate, as does water usage. If you begin getting iron or manganese staining
or H
2
S odor in your home, typically due to higher than normal water usage, you may choose to
regenerate filter immediately.
NOTE: If you use water during the 61-81 minute regeneration period the water will be untreated by
the EasyWater Toxin .
a. Press and hold the REGEN button for three seconds. Open two faucets inside the home.
