QUICK START GUIDE
４
|
P a g e
2
nd
male terminals
2
nd
Female terminals
5. After loosen the screws, one hand to catch the root of Z
axis, one hand to catch the Middle of Z axis, then use force
to pull out Z axis(the aluminum profile).
6. Turn Z axis to vertical and plug into the slots
where pulled out just now, First tighten the 3
srcews in Area B. then to tighten the 5 screws
close to Z axis in area A(belows).
7. Take the platform out
8. Platform fixture stands
9.
Connect the 2 terminals of printers to the 2 female
terminals of platform.
10. After connect well, then put the platform into the
printer
Root of
Z-axis
Z
axis
Z axis
A
Guiding poles
Magnetic
Guiding holes
Magnetic
Adjust spring
Adjust nuts
1st Female terminals
1
st
male terminals
B
A
