QUICK START GUIDE
9
|
P a g e
(2)Put the Nuts insert into the slot of base, to Insert M3 screw from the side panel. Fasten the side panels and base, then
get bridge through the center hole of filament holder, then finally to put the bridge insert the side panels.
D14, How to put the filament into the hose of 3d printer?
(1), Put the assembled filament holder at the back of the 3d printer.
(2), Cut about 2-5mm filament end, to assure the end to be smooth.
(3), Straighten up the filament end(10-15mm) by hand.
(4), Get the filament through the hose besides the rocker arms.
(5), Press the rocker arm and put the filament through slots where feeding gears and guiding wheels formed then leads to
the guiding tube.
(6), Use force to push the filament to get close to the print head then loose the rocker arm.