Easytech s.r.l. – User Manual T CaRe Compact
rev. D
Pag. 24 di 36
To restart with the same treatment it is possible to both the
start
command (on
touch
screen
) or the button on the knob can be used; the treatment restarts with the conditions
set, the power increases with a ramp up to the set value.
The operating parameters can also be changed during treatment (and the values on the
screen will be updated accordingly).
Figure 4-3 –
Treatment in progress
If during a session the patient cannot tolerate the heat generated with the set power level
(eg for simple hypersensitivity) you can put the unit in
Pause
(press
▌▌
)
in order to stop the
timer and change the setting. Reached the new value, press
start
(
►
) and resumes
processing from where it was stopped.
When the treatment is active, a LED inside the handpiece lights up, at the resistive electrode
the led colour is red-orange, for capacitive one there is blue light.
When treatment is active, LED comes on the handpiece (only for Power and
Physio
Aesthetic), to the resistive electrode and the electrode Face (only Physio Aesthetic) the LED
colour is orange-red, for those capacitive and Body (Physio Aesthetic) you have a blue light.
