Glider Perfect Fit Guide
Glider
step one - measure
Before transferring into the Glider,
measure for approximate (A) seat depth
and seat to (B) foot plate settings.
Caution:
These adjustments are only to be
made while the unit is unoccupied.
step two - seat depth
To adjust seat depth, loosen the knob
under the seat (C). Use measurement (A)
and measure from the inside of the knee
pad to the back. Depress the snap button
on the adjustment tube while moving the
back (D). Adjust the seat depth until the
proper measurement has been reached.
Tighten the knob (C) after adjusting.
Caution:
The following adjustments are only
to be made in the seated position.
step three - back angle
After achieving the desired seat depth,
rotate the back angle (E) adjustment knob
so the (F) seat/back angle indicator on the
side of the unit is in the green area prior
to standing.
Note: Repeat steps 2 and 3 for each color
adjustment.
step four - foot plates
Use the (B) measurement to adjust the
foot plate height. Loosen the (G) knobs on
the foot plates to adjust height. Tighten
the knobs after positioning. The knees
should be slightly lower than the hip (H).
step five - positioning
Position the user’s hips as close as
possible to (I) Glider’s hip pivot.
step six - knee pad
Slide into knee pads (J) and secure the calf
straps behind the knees.
(C)
(D)
(B)
(A)
(F)
(E)
Inspect your standing frame periodically to ensure it is in safe operating condition.
(G)
(H)
(I)
(J)
Evolv Perfect
Fit Guide
!
!
