page 16
Using Your EasyStand
Using your EasyStand
Adjusting
SEAT DEPTH/BACK ANGLE
• To adjust the seat depth, first loosen the quick adjust knob on seat tube. Then depress the
spring button on the square tube and position the seat to desired depth. After adjusting, tighten
the quick adjust knob securely. You have seven seat depth options ranging from 14 to 18 inches. When
adjusting the seat depth, it is important to have your knee as close to the seat pivot as possible for
proper lift to the standing position.
• Position the back adjustment tube in the same color-coded setting as the seat depth
adjustment. Various back angle adjustments are available.
FOOT HOLDERS
• Consult with your therapist or doctor for proper foot placement and angle.
•
Foot holders should be raised/lowered so that the knee is as close to the seat pivot as possible.
•
Never reposition the foot holders while you are in the standing position.
• The foot holders can be independently adjusted in swivel, height, and pivot.
• To adjust the swivel or pivot of the foot holders, loosen the quick adjust handles on each foot
holder clamp. When you find the desired foot position, tighten the handles securely.
• To adjust the height loosen the same quick adjust handle of the foot holder clamp.
Loosen the factory adjusted bolt on the outside of each clamp only if necessary. Now
the clamps will slide up with 9” of adjustment. Tighten securely.
MOBILE OPTION
• Do not use the mobile option on ramps or uneven surfaces or outdoors.
•
Before transferring into the EasyStand with the Mobile Option, make sure that the casters and
the push rim locking mechanisms are in the locked position. Use these locks whenever
you want to keep the EasyStand stationary.
KNEE PAD
• The knee support should be snug when you are in the seated position. Adjust the foot holders
so that the user’s knees are as close to the seat pivot point as possible.
(If necessary, the knee pad can be inverted on the frame for further adjustment variations)
FRONT PAD
• When in the standing position, the front pad should support your upper body. Adjust the tray
height and depth so you feel comfortable. The front pad can also be independently adjusted
for proper height and it can be inverted as the adjustment holes are offset allowing further
adjustment variations.
Summary of Contents for 5000 YOUTH
