EasyStand 5000 YOUTH, Owner'S Manual

Page: 20 / 46

page 18
Using Your EasyStand
Standing
• Please consult with your therapist or doctor before starting a standing program.
• Once transferred into the EasyStand, position your feet and the knee support and secure any
straps. Push the pump handle forward with 15-25 strokes. The seat will slowly rise into the
standing position. Remember that you can stop the seat anywhere between the sitting and
standing position.
• To return to the seated position, move and hold the pump handle
toward the rear until you have reached your desired position. The seat
will slowly lower until you release the handle.
• If you have difficulty getting the seat to lower, you may not be applying
the proper pressure to the handle.
• If you have difficulty reaching the handle, you may consider
purchasing the actuator handle extension.
• If you have difficulty getting the seat to lower, check to see that you have the seat tube and
the back adjustment tube set at the same color-coded setting. Failure to do this may cause
serious damage to your unit!
• If the unit is in the standing position and nobody is in it, apply moderate pressure to the seat
of the unit while holding the pump handle back. Do not use excessive force.
low
er
rais
e