EasyRobotics PFC-1011-05-CS, User Manual

Page: 3 / 27

Revision: 2021-06
EasyRobotics ApS
ProFeeder C & X User-Manual (en) Page 2 of 26
1. Introduction/intended use
ProFeeder X is designed for easy feeding of CNC machines and other workplaces
and machines. Should be mounted with a fully installed cobot.
1. Safety notice
1.1 Introduction
The intension of this manual is to give a guideline of mounting a cobot at the
ProFeeder X and this is not valid as a CE marking of the robot cell.
A risk assessment most be full filled after the full installation is concluded. Including
the robot, gripper and other equipment and installations at the workspace.
ProFeeder X must be bolted to the floor when performing working operation. The
local governmental safety rules and legislation must be followed when installing and
operating with a robot on the ProFeeder X/Compact.
1.2 Legend
This symbol means danger to life or risk of personal injury or damage to the
equipment. Read carefully. Caution is required!
1.3 Potential hazards
When the robot drags the trays or takes part from the trays there is a danger
of pinching.
The system must not be operating if any doors are open or removed.