EasyRobotics PFC-1011-05-CS, User Manual

Page: 27 / 27

Revision: 2021-06
EasyRobotics ApS
ProFeeder C & X User-Manual (en) Page 26 of 26
12. Declaration of incorporation of partly completed
machinery (for CE-marking)
According to the EU Machinery Directive 2006/42/EC, Annex II 1. B for partly
completed machinery
Manufacturer:
EasyRobotics ApS
Mommarkvej 5
DK - 6400 Sønderborg
Person established in the Community authorized to compile the relevant technical
documentation:
Per Lachenmeier
EasyRobotics ApS
Mommarkvej 5
DK - 6400 Sønderborg
Description and identification of the partly completed machinery
Product / Article ProFeeder X
Type PFX series
Project number 0063-X
Commercial name ProFeeder X
Function
The ProFeeder X (when robot is installed) is to be used for automated feeding for CNC
machines and
other machines/workplaces.
The ProFeeder X provides a framework for the robot's location and it contains both the
processed and unprocessed parts.
It is declared that the following essential requirements of the Machinery Directive
2006/42/EC have been fulfilled:
1.2.4.3, 1.3.1, 1.3.2, 1.3.7, 1.5.3, 1.6.3, 1.7.3, 1.7.4
It is also declared that the relevant technical documentation has been compiled in
accordance with part B of Annex VI
I.
Reference to the harmonized standards used, as referred to in Article 7 (2):
EN ISO 12100:2010-11
Safety of machinery - General principles for design - Risk assessment and risk reduction
(ISO
12100:2010)
EN ISO 4414:2010
Pneumatic fluid power — General rules and safety requirements for systems and their
components
(ISO 4414:2010)
DS/EN ISO 14118:2018 Safety of machinery - Prevention of unexpected start-up
The manufacturer or his authorized representative undertake to transmit, in response to a reasoned request by the national
authorities, relevant information on the partly completed machinery. This transmission takes place
This does not affect the intellectual property rights!
Important note! The partly completed machinery must not be put into service until the final machinery into
which it is to be incorporated has been declared in conformity with the provisions of this Directive, where
appropriate.
Sønderborg, 14/10/2020
Place, Date Signature
Per Lachenmeier
CEO