Revision: 2021-11
EasyRobotics ApS
ProFeeder X, X-XL, Compact & Compact-XL User-Manual
Page 13 of 26
1.12
ProFeeder - Airlock
The Airlock-system can be controlled independently from the buttons placed on the
operator. To allow the robot to control the valve, the system must be wired and
programmed according to 1.22.2.
The lights in the buttons are controlled by the robot-controller and could be
programmed as below:
Light
Status
Blinking Light
Status:
Action needed:
Tray is currently being worked on.
No
Light constantly on
Status:
Action needed:
Tray is done.
Reload tray or parts. Press button to
reset.
Light off
Status:
Action needed:
Tray has not been worked on yet.
No
