Adjust according to your height
Open the Vario 5 cover, turn the 4 nuts in
each corner counter-clockwise. Now, you
will be able to slide the power pack up or
down according to your height or what
shots you want to achieve. See Vario 5
user manual for further details.
Adjust according to your height
To raise the upper arm further, release
the two screws on the upper block
(under the rubber bellow).
Important: The power of the Vario 5
power pack needs to be at its lowest
before attempting this. The highest
setting possible is when the tube is level
with the nylon block, going further than
that can cause damage to the user or
equipment.
If you are lowering the block, make sure
to pre-stretch the line with 5cm/2”.
Locking the arm
To lock the Easyrig STABIL in 90 de-
grees, line up the holes and insert the
pin. The pin is located in the base of the
Easyrig STABIL arm. The locking pin
needs to be screwed on until it is level
with the side of the arm.
Go to our website (Support -> Service
Videos & Manuals -> Easyrig STABIL)
for instructions on how to mount the
Easyrig STABIL onto your Easyrig.
4
5
6
Easyrig STABIL User Manual - rev.02 - 2019-04-30
